Connecting The Instrument - ALPA MEGArod Bedienungsanleitung

ALPA_DIGITAL_INDICATOR_MEGArod IP67/IP54

CONNECTING THE INSTRUMENT

The instrument can be connected to a peripheral via a Proximity (RS or USB), or Power-RS
(Power-USB) cable.
Measured values can be transmitted and the instrument driven using predefined retro-commands.
Note: in Tolerance mode, the tolerance limit lights remain lit only for a few seconds while the
measurement stabilises. On the other hand, they will remain lit continuously if the instrument is
connected to, and powered by, the Power RS (USB) cable.