KERN PES Serie Betriebsanleitung Seite 150

Numeric input:
50

When the balance is in the measuring
mode, hold down the [S] key for about 2
seconds.

When <L. SEt> or <L1 SEt> is displayed,
release the [S] key

Last stored value for the lower tolerance
limit is appears on the display and flashes
(in this example: Weight value)

Press the [TARE/ZERO] key

<0 g> flashes on the display

Enter tolerance limit (Numeric entry: see
chap. 3.3.1)

Press the [S] key

An acoustic signal sounds and the
entered value is displayed briefly (in this
example: Weight value)
If the number of tolerance limits is more than 1:

The display shows <H. SEt> (or <L2 SEt>
... <L4 SEt>)

The last value stored for the tolerance limit
is shown and flashes on the display

Enter tolerance limits as described above
TPES-B_TPEJ-B-BA-def-2319