Care, Maintenance And Repair - LD Systems MON G3 Serie Bedienungsanleitung

SYSTEM SETTINGS (SETTINGS)
Press the rotary-push encoder to enter the main menu and then select the SETTINGS menu item by
turning the encoder (dark background). Press the encoder again to enter the sub-menu and select the
desired sub-menu item by turning the encoder. Confirm your entry by pressing the encoder. Change
a value or status by turning the encoder, confirm the value or status change by pressing the encoder.
The sub-menu items and the corresponding information can be found in the following table. Select
MAIN MENU in the submenu  and press the encoder to return to the main menu, select HOME in the
main menu , confirm by pressing the encoder, then return to the main display. The main display will
automatically appear after approximately 12 seconds of inactivity.
SETTINGS (change value or status = turn encoder, confirm value change or request information = press encoder)
 MAIN MENU
Back to the main menu
LCD DIM
Automatic display dimming
BRIGHTNESS
Setting the display brightness (0 – 100%)
CONTRAST
Setting the display contrast (0 – 100%)
INFO
Display of model number and software version
FACTORY DEFAULT
Reset to factory settings

CARE, MAINTENANCE AND REPAIR

In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned and
if necessary, maintained. The maintenance requirement depends on the intensity of use and the
environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating hours
or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may be limited
in the event of defects resulting from inadequate maintenance.
ON Display illumination is automatically switched off after approx. 10 seconds
of inactivity
OFF Display lighting permanently on
CANCEL Cancel reset
RESET  SURE? YES
CANCEL
Perform reset
Cancel reset
15