Assembly, Connection And Operation - LD Systems MAUI 44 G2 Bedienungsanleitung

FEATURES
• Professional column PA system with 1500 W RMS and 132 dB max. SPL
• TrueWireless™ stereo technology for wireless stereo pairing of two column systems
• Automatic setup detection
• Fast and simple assembly without stands or cables
• Rugged subwoofer housing made out of polyurea-coated birch plywood and lightweight, powder-coated aluminium column
PLEASE NOTE: The optional subwoofer extension LDMAUI44G2SUB is technically identical to the subwoofer from the LDMAUI44G2 PA system.
The subwoofer extension LDMAUI44G2SUB is supplied with a cover for the connection panel for the column speakers.

ASSEMBLY, CONNECTION AND OPERATION

GENERAL INFORMATION
Both the subwoofer of the LD Systems MAUI 44 G2 PA system and the optional subwoofer exten-
operate the system on a trolley as there is a risk that the entire system may begin to move in an
during operation, a minimum distance of 50 cm must be maintained between the back of the
subwoofer and other similar objects such as walls.
Please ensure that the system as well as any connected devices such as mixing consoles, CD play-
ers etc. are connected to the correct audio and power connections. Use only undamaged cables
with a suitable diameter and always unroll cable reels fully. Use cable protectors to avoid tripping
accidents caused by loose cables. Never position the device directly on an edge. Do not place the
subwoofer on a table. In order to eliminate unwanted noise when turning on connected devices,
ASSEMBLY
The LD Systems MAUI 44 G2 PA system comprises three components:
Subwoofer with integrated electronics for all system components.
A
MAUI 44 G2 LC:
B
Lower vertical array column with six 3.5" speakers, each with a multipin connector on the
top and bottom and a guide pin on the underside.
MAUI 44 G2 U:
C
The upper vertical array column with six 3.5" loudspeakers with phase plug, tweeters and
a multi-pin connector and guide pins on the bottom side.
After the subwoofer has been placed in the desired position, the lower array column is attached
to the subwoofer. Rugged guide pins help the multipin connectors on each speaker to interlock
perfectly. One strong magnet provide extra stability. The upper vertical array column is then
attached to the lower column in the same way.
To simplify transport, set-up and dismantling, two ergonomic handles are located on the sides of
that also provides protection for the connection panel and controls during transport. Recessed
handles are located on the top and underside of the array columns.
The optional MAUI 44 G2 SUB subwoofer extension is positioned next to the MAUI 44 G2 PA system.
The orientation of the subwoofer extension depends on whether the cardioid preset in the
subwoofer extension is used or not.
C
B
A
5