Connections, Controls, And Indicators - LD Systems ROADJACK 8 Bedienungsanleitung

CONNECTIONS, CONTROLS, AND INDICATORS:

1
2
1
INPUT CH 1
Balanced microphone input (XLR / 6.3 mm jack combo) It is also possible to use an unbalanced microphone
cable (mono jack).
2
LEVEL CH 1
Volume controller for channel 1 (CH 1). Turning the knob to the right increases the volume and turning it to
the left decreases it.
3
INPUT CH 2
Unbalanced instrument/microphone input with 6.3 mm jack.
4
LEVEL CH 2
Volume controller for channel 2 (CH 2). Turning the knob to the right increases the volume and turning it to
the left decreases it.
5
INPUT CH 3 (CINCH)
Unbalanced line input (RCA) for connecting an external audio source (e.g., CD player, MP3 player). An incoming
stereo signal is mono summed internally. To activate the RCA input, switch 8 (MP3 / AUX) on the control panel
must be depressed, the incoming signal is now on channel 3 (CH 3). If the socket of the mini-jack input is in
use, the RCA jacks of channel 3 (CH 3) are muted.
6
5
3
5
4
LOW 1 2
6
8
7
-6
3
+6 -6