Kärcher K 2 Home T150 Bedienungsanleitung Seite 13


All current-conducting parts in the working
area must be protected against jet water.

The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.

The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.

For safety reasons, we recommend that you
operate the appliance only via a earth-leak-
age circuit breaker (max. 30 mA).

Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.
Safety Devices
Caution
Safety devices protect the user and must not be
modified or bypassed.
Power switch
The appliance switch prevents unintentional op-
eration of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
The stability of the appliance is warranted when
it is placed onto an even surface.
Description of the Appliance
These operating instructions describe the maxi-
mum equipment. Depending on the model, there
are differences in the scopes of delivery (see
packaging).
Illustrations on Page 2
1 High pressure connection
2 Appliance switch "0/OFF"/ „I/ON"
3 Storage hook for high pressure hose and
mains connection cable
4 Transport handle
5 Water connection with integrated sieve
6 Detergent suction hose (with sieve)
7 Coupling element for water connection
8 Storage for spray lance
9 Storage for trigger gun
10 Mains cable with mains plug
11 Bearing wheel
12 Trigger gun
13 Lock trigger gun
14 Clamp for high pressure hose
15 High pressure hose
Optional accessories
16 Spray lance with pressure regulation (Vario
Power)
17 Spray lance with Dirtblaster
18 Spray lance with high pressure nozzle
19 Washing brush
20 Rotary washing brush
21 Foam nozzle with detergent container
Special accessories
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 3
Illustration

Insert the transport wheels and lock them.
Illustration

Attach the carrying handle.
Illustration

Screw the coupling element to the water
connection on the appliance.
Illustration

Pull out the clamp for the high-pressure hose
from the hand spray gun (e.g. a Philips
screwdriver).
- 6
EN
Operation
Before Startup
13