Sony VPL-SW525C Kurzreferenz Seite 48

Position
(Lens shift)
Lens shift dial V
Lens shift dial H
* Do not adjust the lens shift more than the indicated range, otherwise it may cause a
malfunction. For details, see "Projection Distance and Lens Shift Range".
Adjusting the tilt of the projector with the adjusters
You can adjust the height of the projector
using the adjusters.
By changing the tilt of the projector with
adjusters, you can adjust the position of the
projected image.
Notes
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the adjuster extended.
Changing the aspect ratio of the projected image
Press the ASPECT key on the remote commander to change the aspect ratio of the projected
image. You can also change the setting in Aspect of the Screen menu.
14
GB
Projecting an Image
For adjusting lens
shift, turn each dial
with a flat-bladed
*
screwdriver, etc.
Position
Adjuster