After Use; Accessories - Makita CL100DZX Bedienungsanleitung

Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
Fig.20
Corner nozzle
Fit on the corner nozzle for cleaning corners and
crevices of a car or furniture.
Fig.21
Corner nozzle +Extension wand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
Fig.22
Cleaning without nozzle
You can pick up powder and dust without nozzle.
Fig.23
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.
Symptom
Weak suction power
Not working
010051
NOTE:
Do not attempt to repair cleaner by yourself.
•
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

ACCESSORIES

CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Extension wand (Straight pipe)
•
Nozzle
•
Nozzle for carpet
•
Area to be investigated
Is capsule full of dust?
Is filter clogged?
Is battery exhausted?
Is battery exhausted?
or attachments
Only use accessory or

After use

When storing the cleaner, hang it from a nail using the
convenient hanger in back.
Fig.24
Cleaning
Fig.25
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Fig.26
Wash the filter in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried filter may
cause poor suction and shorten the service life of the
motor.
Things to Check Before Asking for Repairs
Empty dust from capsule.
Dust down or wash filter.
Recharge battery.
Recharge battery.
Shelf brush
•
Corner nozzle
•
Round brush
•
Flexible hose
•
Filter
•
Prefilter
•
Various type of Makita genuine batteries and
•
chargers
are
7
Fixing method