Installation In; Installer Setting -How To Enter Installer Setting Mode - LG UV60 Benutzerhandbuch

INSTALLATION INSTRUCTIONS
12
INSTALLATION INSTRUCTIONS

Installer Setting -How to enter installer setting mode

! CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the re-
sults. In this case, free service cannot be provided.
Downloaded from AC-Manual.com Manuals
All manuals and user guides at all-guides.com
1
With the FAN SPEED button pressed,
press the RESET button.
2
By using the TEMPERATURE SETTING
button, set function code and setting
value. (Please refer the Installer Setting
Code Table.)
3
Press the ON/OFF button toward the in-
door unit 1 time.
4
Reset the remote controller to use the
general operation mode.
Refer to the Installer Setting Code Table
on the next page.