Crisping Bread Rolls; Crumb Tray - Silvercrest STC 920 B1 Bedienungsanleitung

4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top.
NOTE
► Press the "Defrost" button
The integrated control lamp goes out and the defrost process switches to
a normal toasting process.

Crisping bread rolls

Never lay bread rolls directly onto the toaster, always use the bread roll rack
1) Fold out the two feet of the bread roll rack
2) Place the bread roll rack
the toasting slots
arched sections on the feet. In this position, the bread roll rack
appliance stably.
3) Place the bread rolls onto the rack and start the toasting procedure. Turn the
toasting dial
vary depending on the composition and type of bread roll.
NOTE
► After toasting, the rolls will be very hot.
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
5) When you are finished with the bread roll rack
space-saving storage:
–
Wait until the bread roll rack
–
Remove it from the appliance.
–
Gently push the feet of the bread roll rack
lie flat.

Crumb tray

When toasting, crumbs that fall from the bread are collected in the crumb tray
1) To empty crumbs from the crumb tray
2) Tip out the crumbs.
3) Slide the crumb tray
│ GB │ IE
■ 26
again to switch off the defrost function.
onto the appliance so that the feet protrude into
and the bar between the toasting slots
up to level 2 , at most. The actual level of browning can
has cooled down.
back into the toaster so that it palpably engages.
.
, you can fold it for
inwards so they fold in and
, simply pull it out.
STC 920 B1
.
fits into the
sits on the
.