Using The Product; Stop Toasting; Reheat Bread; Defrost Bread - Silvercrest SDLT 1500 B2 Bedienungs- Und Sicherheitshinweise

Turn the toast setting knob
the highest setting (marking = highest number).
Push the bread carriage lever
activate the product without bread. The white
indicator on the stop button
The product stops automatically and releases
the bread carriage lever

Using the product

Plug the mains plug into an appropriate plug
socket.
Turn the toast setting knob
setting (lowest number = least toasted, high-
est number = most toasted).
Note: when first using this product, we
recommend that you start with toast setting
2 or 3. Depending on the types of bread
used and personal preference, different toast
settings can be selected.
Recommendations for toasting:
Toast setting 2 for white bread
Toast setting 5–6 for brown bread.
Note: turn the toast setting knob
somewhat if you put in fewer pieces of bread.
Place the bread in the toasting slot
press the bread carriage lever
it locks into place. The white indicator on the
stop button lights up.
4
The automatic bread centring function centres
the bread which has been placed in the
toasting slot .
2
Note: the bread carriage lever
stays down when the product is connected
to the electricity supply.
The toast jumps up automatically when the
toasting process is over.

Stop toasting

You can push the stop button
to stop the toasting process.
The toast jumps up and the device stops
automatically.
Pull the plug out of the plug socket.
clockwise to
7
down to
3
lights up.
4
.
3
to the highest
7
down
7
and
2
down until
3
only
3
at any time
4
Note: the intensity of toasting depends on
how full the device is and can differ even at
the same toast setting
put in, the more it is toasted. Always choose
a somewhat lower toast setting
slices of bread are to be toasted.
Note: always stop the device by pressing
the stop button if bread is stuck. Remove
4
the mains plug from mains socket and care-
fully remove the bread from the product with-
out damaging the heating element.

Reheat bread

If the toast has gone cold, you can reheat it
using the reheating function without toasting it.
Put the bread in the toasting slot
the bread carriage lever
into place. The white indicator on the stop
button lights up.
4
Press the reheat button
reheating function. The white indicator on
the reheat button lights up.
5
The toast jumps up automatically when the
reheating process has ended.

Defrost bread

To defrost frozen bread, place it in the toast-
ing slot and select the toast setting using
2
the toast setting knob
7
riage lever down until it locks into place.
3
The white indicator on the stop button
lights up.
Press the defrost button
reheating function. The white indicator on
the defrost button lights up.
6
The toast jumps up automatically when the
toasting process has ended.

Reheat bread rolls

Do not put bread rolls straight into the device.
Instead, always use the bread roll rack
. The less bread is
7
if fewer
7
and press
2
down until it locks
3
to activate the
5
. Push the bread car-
4
to activate the
6
.
1
GB/CY 9