Bosch 0 275 007 031 Originalbetriebsanleitung Seite 35

Operating mode "Fitness"
Via this mode you can view various fitness-related information.
Based on the activity levels provided in your registration, the
effect of your previous activities will be displayed on your
stamina level (training effect).
To check your heart rate, you can use a chest strap, which you
can connect to Nyon via Bluetooth®.
Compatible models can be found in the online manual under
"www.Bosch-eBike.com/nyon-manual".
A chest strap is not included in the delivery.
f1
f2
f3
f4
f1 Clock
f2 Current performance/heart rate*
f3 Display of the current training effect
f4 Training effect
f5 Kilocalories burned
f6 Current cadence
f7 Average speed
f8 Duration
* When using a chest strap to measure the heart rate (not included
in the delivery), your current heart rate will be displayed instead of
the performance.
Via the sub menus, you can reset the average values or switch
to individualised displays. Detailed instructions can be found
in the online manual under
"www.Bosch-eBike.com/nyon-manual".
Operating mode "Settings"
This operating mode allows you to set the basic configura-
tions of your on-board computer.
Note: Some basic configurations can only be changed when
Nyon is inserted into the holder 4.
To reach the "Settings" menu, press the joystick 1 down in
the main menu until "Settings" is displayed.
Tip: If you press the joystick down long enough, you will also
reach the "Settings" menu.
The following configurations can be made:
– "Connections": You can configure the Bluetooth® config-
urations, a new smartphone connection, a WiFi connection
or a heart rate monitor.
When you enable WiFi, Nyon searches for available net-
works. Found networks will be displayed. Use the joystick
1 to select the desired network and enter the password.
Bosch eBike Systems
– "My eBike": When Nyon is plugged in, you can change the
pre-set value given by the manufacturer of the wheel cir-
cumference by ±5 %.
– "International": You can set speed and distance in kilo-
metres or miles, display clock in 12 or 24 hour format, se-
lect the time zone and set your preferred language. The
current time is automatically taken from the GPS signal.
f5
f6 – "Map&Navigation": Here you can configure the map dis-
play and turn on automatic adaptation of the display, de-
f7 pendant on the ambient brightness.
– "Brightness": You can adjust the brightness of the display
f8
here.
– "My Nyon": Here you can create a new user profile, config-
ure the Home button, the counters, such as journey dis-
tance, calories burned and automatically set average val-
ues to 0 every night or reset Nyon to the factory
configurations.
Status display
Depending on the operating mode shown, all status indica-
tors are not always displayed.
s1 s2
14:30
s5 s6 s7
s1 Bike lights display/Charge level indicator of Nyon battery
pack
s2 Clock display
s3 Speed display
s4 North display
s5 Bluetooth®/WiFi connection display
s6 Assistance level display
s7 Charge level indicator of the eBike battery pack
s8 GPS signal display
s9 Zoom range/remaining range display
s8 s9
0 276 001 SPN | (19.2.15)
English–7
s3 s4
22
km/h
100 m
105 km