Hilti NURON AG 6D-22-150 Bedienungsanleitung Seite 39

Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4 Consumables
Only synthetic-resin-bonded, fiber-reinforced discs of maximum Ø 150 mm (6") which are approved for use
at a rotational speed of at least 9500 rpm and a peripheral speed of 80 m/s may be used.
The maximum permissible grinding disc thickness is 8 mm and the maximum permissible cut-off wheel
thickness is 3 mm.
ATTENTION! When cutting or slitting with cut-off wheels always use the standard guard with the
additional front cover, or a fully enclosing dust hood.
Discs
Abrasive cut-off wheel
Diamond cut-off wheel
Abrasive grinding disc
Diamond grinding disc
Wire brushes
Diamond core bit
Abrasive resin-fiber disc
Suitability of discs for the equipment used
Item Equipment
Guard
A
(standard)
Front cover
B
(in combination with
A)
Dust hood (grinding)
C
DG-EX 125/5"
Dust hood (slitting)
D
DC-EX 125/5"M
Adapter DC-EX SL
E
(In combination with
D)
Side handle
F
(standard)
DCBG 125 hoop
G handle (optional for
F)
*2282186*
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
Wire brushes
Drilling in tiles
Rough grinding
AC-D AP-D AG-D
AF-D
AN-D
✓ ✓ ✓
✓ — —
— — —
— — —
— — —
✓ ✓ ✓
✓ ✓ ✓
2282186
Designation
AC-D
DC-TP, DC-D
(SPX, SP, P)
AG-D, AF-D, AN-D
DG-CW⌀ 125(5")
(SPX, SP, P)
3CS, 4CS
3SS, 4SS
DD-M14
AP-D
DG-CW DC-TP
(SPX/SP/P) DC-D
(SPX/SP/P)
✓ ✓
— ✓
✓ —
— ✓
— ✓
✓ ✓
✓ ✓
Material
Metal
Mineral
Metal
Mineral
Metal
Mineral
Metal
3CS/4CS
3SS/4SS
DD-M14
✓
—
—
—
—
✓
✓
English 31