Operating The Appliance - Grundig VCH 9731 Bedienungsanleitung

USAGE _ __________________________________
Intended use
This appliance is intended for domestic use. It is not
suitable for industrial use.
Installation
Installation of upper and lower
bodies
1
Fix the upper body onto the lower body.
2
Rotate the upper body connection screw
clockwise to fix it.
Installation of the lower body and
the brush
Attach the brush to the suction nozzle.
18 ENGLISH
Charging the appliance
1
Plug the adapter into the charging socket at the
back of the appliance and connect the plug to
the wall socket.
–
The charging indicator will turn on and the ap-
pliance will switch to the charging mode. The
charging indicator will flash.
–
The charging indicator will remain on after
charging is complete.
Notes
▪
It takes up to 8 hours for the appliance to be
fully charged.
Warning
▪
Appliance cannot be operated during the charg-
ing process.
Operating the appliance
1 Push the control button forward and move it to
the desired level to operate the appliance.
2
Pull back the control button and move it to
"OFF"
level to switch off the appliance.
Adjusting the suction power
You can adjust the suction power by using the con-
trol panel on the appliance.
C
"ECO"
1 Use the
cloths and sofas.
"CARPET"
2
Use the
"TURBO"
3
Use the
Notes
▪
Icon of the selected level will be shown on the
display during operation.
▪
It can be used up to 75 minutes with 100%
charge at the minimum level.
▪
The charging indicator will be on during opera-
tion. As charging level decreases, these indica-
tors will gradually go off and the appliance will
stop working when all indicators are off.
level to clean curtains, table
level to clean carpets.
level to clean hard floors.