Shaving Using The Mains Adapter; Trimmer/Long Hair Trimmer - Silvercrest 102881 Bedienungsanleitung

7) Clean the shaver after every use with the supplied brush t.
For a more thorough cleaning, read the section "Cleaning and
care".

Shaving using the mains adapter

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
If you want to use the shaver to load without charging it, you can
also use it directly with the mains adapter r:
1) Plug the connection plug e into the charging socket w on the
shaver.
Ensure the +/- terminals are correctly aligned. The guide rod
in the charging socket w must be in the guide groove on the
connection plug e. Otherwise the connection plug e cannot
be plugged in.
2) Insert the plug into a mains power socket.
Now you can use the shaver.

Trimmer/long hair trimmer

To shape your beard, form sideburns or shave eyebrows, use the
trimmer unit 7.
1) Pull the shaver unit 2 off the handset (if attached).
2) Attach the trimmer unit 7 to the drive shaft 1. Depending on
whether you want to use the broad 8 or narrow long hair
trimmer 6, change the direction of attachment.
SRR 3.7 A1
GB
IE
11