Use - Miele Complete C2 SF-Serie Gebrauchsanweisung

en
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the exhaust filter TimeStrip
works®
The exhaust filter TimeStrip® change
indicator shows the remaining func-
tional life of the exhaust filter. After ap-
prox. 50 operating hours the display will
be completely filled with red (dia. 17).
50 operating hours equates to approx-
imately one year of use.
Using the accessories supplied
(dia. 18)
 Crevice nozzle

Dusting brush

Upholstery nozzle
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
– AllergoTeQ floorhead
– Turbobrush
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (dia. 19)
 Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
 Take out the accessory you require.
 Press down firmly on the lid to close
it.
38
Adjustable floorhead (dia. 20)
The adjustable floorhead can also be
used for vacuuming the stairs.

For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.

Use

Unwinding the mains cable (dia. 21)
 Pull the mains cable out to the re-
quired length.
 Insert the plug into the socket.

If vacuuming for longer than 30
minutes, the cable must be pulled
out all the way. There is a risk of
overheating and damage.
To rewind the cable (dia. 22)
 Switch off at the wall socket and re-
move the plug.
 Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (dia. 23)
 Press the On/Off foot control .
To regulate the suction power
(dia. 24)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.