Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting / Cleaning & Care / Technical Specifications; Technical Specifications - Skandika SF-2960 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Grasp the resistance straps and stand up straight
on the unit. While oscillating, pull the resistance
bands slowly and evenly upwards. Then slowly
lower them again and repeat.
TROUBLESHOOTING
Device cannot be started:
Check plug (power connection) and if power switch is switched on.
Remote control does not work:
Replace battery and check, if the distance between remote controller and device is less max. 2 meters.
Other, abnormal behavior:
Disconnect the power supply, wait for 2 minutes and re-start the device.
Error codes: E01/E05: Signal error; E04: Overvoltage protection triggered; E06: Vibration motor error
If the problem cannot solved with above hints, contact the customer service.
CLEANING & CARE
Before cleaning the appliance, make sure that the appliance is switched off and the plug is disconnected.
Allow the unit to cool down.
Clean the device with a slightly damp cloth only. Never use brushes, aggressive cleaning agents, petrol,
thinners or alcohol. Rub the seat dry with a clean dry cloth.
Never immerse the appliance in water to clean it and ensure water cannot get into the appliance.
Wait until the device is completely dry before using it again.
Take care when rolling up the mains lead to avoid damaging it.
You should ideally store the device in its original packaging and keep it in a clean, dry place.
You can also clean the remote control with a slightly moistened cloth. Remove the battery first - be careful
not to swallow it and keep it in a safe place! Allow the remote control to dry completely before replacing the
battery.

TECHNICAL SPECIFICATIONS

Max. user weight: 120 kg (264 lb.)
Power supply: 220V ~ 50/60 Hz
Vibration frequencies:
Level
Hz
Level
Hz
1
5,8
2
5,9
11
7,05
12
7,1
21
22
8,2
8,3
Level
Hz
Level
Hz
Level
3
6,05
4
6,2
13
7,2
14
7,4
15
23
24
25
8,4
8,5
23
EXERCISE INSTRUCTIONS / TROUBLESHOOTING /
CLEANING & CARE / TECHNICAL SPECS
Grasp the resistance straps and stand on the device with
one leg with a slightly bent knee.
While oscillating, pull the resistance bands slowly and
evenly upwards. Then slowly lower again, change leg and
repeat.
Rated power: 150 W
Net weight approx.: 15.1 kg
Hz
Level
Hz
Level
5
6,3
6
6,4
7
7,5
16
7,6
17
26
27
8,7
8,8
Hz
Level
Hz
Level
6,5
8
6,6
9
7,75
18
7,9
19
28
29
8,9
9,0
Hz
Level
Hz
6,8
10
6,9
8,0
20
8,1
30
9,1
9,2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

V 2500 single engineSf-2961Sf-2962

Inhaltsverzeichnis