Weighing To Target Quantity Or Target Weight And Tolerance Check; Tolerance Check For Target Quantity - KERN CPB-N Serie Betriebsanleitung

10 Weighing to target quantity or target weight and tolerance check

An acoustic signal is sounded as soon as the number of items placed or a certain
weight value reaches or exceeds/drops below a pre-set limit (depending on the
settings in menu F10)
Options:
• OK Signal sound, when the load is within the set range
• Low Signal sound, when the load is below the lower limit value
• NG Signal sound, when the load is beyond the set range
• High Signal sound, when the load is above the upper limit value

10.1 Tolerance check for target quantity

Select target number mode:
Keep pressed, the set mode will
appear
40
Check psc - Tolerance check for target item
number
Press
Check off – Tolerance check switched off
Press
Check net -: Tolerance check for target
weight
CPB-N / CPB-DM-BA-e-1831