Automatic Adding-Up - KERN CPB-N Serie Betriebsanleitung

9.2 Automatic adding-up

With this function the individual weighing values are automatically added into the
summation memory when the balance is unloaded without pressing
when an optional printer is connected.
Menu settings:
Add up:
 Place weighing goods A.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory (ACC1) and printed out.
 Place goods to be weighed B.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory (ACC2) and printed out.
 Add more weighed goods as described before.
Please note that the balance must be unloaded between the individual weighing
procedures.
 This process can be repeated 99 times or until the weighing range of the balance
is exhausted.
For how to display and delete the total sum, as well as a printout example, see
chap. 9.1.
CPB-N / CPB-DM-BA-e-1831
[ F4�AU�QN ]
and edited,
39