Werbung
Verfügbare Sprachen
Verfügbare Sprachen
– Adjustment of daylight saving to standard time and vice versa
In case of reception without interference, the time of your watch is ad justed auto-
matically during the night at 2:00 or 3:00 o'clock. Interference may delay the adjust-
ment until early morning hours.
– Battery replacement indication
Blinking display of the date indicates battery voltage lower than 2.4 V. The second-
sweep-hand stops in 12:00 position. Following functions are not available during
battery replacement indication: transmitter call and selection of time zone.
It is possible that the display for a change of battery may be activated by unfavou-
rable external conditions (very low environmental temperature). After the external
conditions will have normalized again, the display for a change of battery will auto-
matically be deactivated. All functions will again be fully available.
24
Specifications:
Reception frequency
Range of transmitter
(receiver sensitivity)
Quartz time base
Battery type
Operating voltage range
Theoretical battery life
(normal use)
Time zone adjustment range
Operating temperature range
Storage temperature range
– Subject to technical modifications without notice –
– This product complies with the EMC Directive of the European Union. –
77.5 kHz, amplitude modulated,
DCF coding
up to 1500 km radius of
Frankfurt/Main
32 kHz
Li CR 1620 (3 V / 75 mAh)
2.4 V to 3.4 V
2 years
worldwide
0°C to +55°C
–20°C to +70°C
25
Werbung
