Climatic Classes; Installation; Site - Pkm GKS 102 Bedienungsanleitung

2. Climatic classes

Look at chap. T
class of your appliance. Your appliance can be operated in rooms with
relevant conditions as named below (EN ISO 23953-2).
Climatic class Wet bulb
of test room temperature
0 20
1 16
2 22
3 25
4 30
5 27
6 40
7 35
8 23.9

3. Installation

3.1 Site

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.
D
ECHNICAL ATA
Relative
0 C humidity %
50
80
65
60
55
70
40
75
55
for information about the climatic
Dew point
9.3
12.6
15.2
16.7
20.0
21.1
23.9
30.0
14.3
25
0 C Water vapour
in dry air g/kg
7.3
9.1
10.8
12.0
14.8
15.8
18.8
27.3
10.2