Technical Data - Austroflamm KOKO 2.0 Benutzerhandbuch

Koko 2.0

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect it
to the flue pipe of an existing other stove or another hearth
for solid fuels, as long as the chimney complies with DIN
4705, Part 3.
TECHNICAL DATA
Height
Width
Depth
Weight
Weight with soap stone
Flue pipe outlet diameter
Nominal thermal output (EN 13240)
Maximum thermal capacity
Smallest heating capacity
Room heating capacity (depending on
building insulation)
Technical data according to Regulation (EU) 2015/1185 and delegated Regulation
(EU) 2015/1186
Contact details for the manufacturer or their authorised representative
Manufacturer:
Contact:
Address:
Appliance details
Model identification(s):
Equivalent models:
Test reports:
Applied harmonized standards:
Other standards/technical specifications. Specifications:
Indirect heating function:
Direct heat output:
Indirect heat output :
1
Properties for operation with the preferred fuel
Space heating annual use efficiency η
Energy efficiency index (EEI):
1148 mm
546 mm
427 mm
152 kg
177 kg
150 mm
6 kW
8 kW
3,5 kW
65 - 165 m³
Austroflamm GmbH
-
Austroflamm-Platz 1
4631 Krenglbach
Austria
Koko 2.0
-
RRF – 40 12 3133
EN 13240
No
6.0
-
: 70.1
s
106
12
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the calculation
of the chimney measurements in accordance with DIN
4705, Part 2
Fluegas mass flow
Fluegas temperature
Minimum feed pressure
Nominal thermal output
closed 4,43 g/s
closed
closed
at 0.8 times n. ther.
outp.
english
331 °C
10 Pa
8 Pa