Technical Data - Austroflamm FLOK 2.0 Benutzerhandbuch

Flok 2.0

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect
it to the chimney together with an existing other stove or
another hearth for solid fuels, as long as the chimney
dimensioning calculation complies with DIN 4705, Part 3.
TECHNICAL DATA
Height
Width
Depth
Weight
Flue pipe outlet diameter
Nominal thermal output (EN 13240)
Maximum thermal capacity
Smallest heating capacity
Technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU)
2015/1186
Contact details for the manufacturer or their authorised representative
Manufacturer:
Contact:
Address:
Appliance details
Model identification(s):
Equivalent models:
Test reports:
Applied harmonized standards:
Other standards/technical specifications. Specifications:
Indirect heating function:
Direct heat output:
Indirect heat output 1 :
Properties for operation with the preferred fuel
Space heating annual use efficiency η
Energy efficiency index (EEI):
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the calculation of
the chimney measurements in accordance with DIN 4705,
Part 2
Fluegas mass flow
Fluegas temperature
Minimum feed pressure
Nominal thermal output
958 mm
425 mm
417 mm
110 kg
130 mm
4 kW
6 kW
2,5 kW
Austroflamm GmbH
-
Austroflamm-Platz 1
4631 Krenglbach
Austria
Flock 2.0
-
RRF – 40 12 3120
EN 13240
No
4.0
-
: 70.9
s
107
12
Room heating capacity (depending on
building insulation)
english
closed 3,92 g/s
closed 343 °C
closed 12 Pa
at 0.8 times n.
10 Pa
ther. outp.
34 - 88m³