Technical Data - Austroflamm UNO XTRA Benutzerhandbuch

Uno Xtra

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect it
to the chimney together with an exisiting other stove or
another hearth for solid fuels, as long as the chimney
dimensioning complies with DIN 4705, Part 3.
TECHNICAL DATA
Height
Width
Depth
Weight
Weight with soap stone
Flue pipe outlet diameter
Nominal thermal output (EN 13240)
Maximum thermal capacity
Technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU)
2015/1186
Contact details for the manufacturer or their authorised representative
Manufacturer:
Contact:
Address:
Appliance details
Model identification(s):
Equivalent models:
Test reports:
Applied harmonized standards:
Other standards/technical specifications. Specifications:
Indirect heating function:
Direct heat output:
Indirect heat output 1 :
Properties for operation with the preferred fuel
Space heating annual use efficiency η
Energy efficiency index (EEI):
1220 mm
588 mm
454 mm
252 kg
312 kg
150 mm
7 kW
9 kW
Austroflamm GmbH
-
Austroflamm-Platz 1
4631 Krenglbach
Austria
Uno Xtra
-
RRF – 40 09 2097
EN 13240
No
7.0
-
: 70.1
s
106
11
Smallest heating capacity
Room heating capacity (depending on
building insulation)
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the
calculation of the chimney measurements in
accordance with DIN 4705, Part 2
Fluegas mass flow
Fluegas temperature
Minimum feed pressure
Nominal thermal output
3,5 kW
82 – 210
m³
closed
6,5 g/s
closed
300 °C
closed
12 Pa
at 0.8 times
10 Pa
n. ther. outp.
english