Technical Data - Austroflamm STILA Benutzerhandbuch

english

1. TECHNICAL DATA

As a stove of construction type 1, it is possible to connect it
to the chimney together with an existing other stove or
another hearth for solid fuels, as long as the chimney
calculation complies with DIN 4705, Part 3.
TECHNICAL DATA
Height
Diametre
Weight
Weight HMS
Flue pipe outlet diameter
Nominal thermal output (EN 13240)
Maximum thermal capacity
Smallest heating capacity
Room heating capacity (depending on
building insulation)
Technical data according to Regulation (EU) 2015/1185 and delegated Regulation (EU)
2015/1186
Contact details for the manufacturer or their authorised representative
Manufacturer:
Contact:
Address:
Appliance details
Model identification(s):
Equivalent models:
Test reports:
Applied harmonized standards:
Other standards/technical specifications. Specifications:
Indirect heating function:
Direct heat output:
Indirect heat output 1 :
Properties for operation with the preferred fuel
Space heating annual use efficiency η
Energy efficiency index (EEI):
10
1695 mm
444 mm
142 kg
42 kg
130 mm
5 kW
7 kW
2,5 kW
48 - 124 m³
Austroflamm GmbH
-
Austroflamm-Platz 1
4631 Krenglbach
Austria
Stila
-
RRF – 40 12 3170
EN 13240
No
5.0
-
: 72.0
s
108
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the calculation
of the chimney measurements in accordance with DIN
4705, Part 2
Fluegas mass flow
Fluegas temperature
Minimum feed pressure
Nominal thermal output
closed 4,1 g/s
closed 311 °C
closed 12 Pa
at 0.8 times n.
10 Pa
ther. outp.
Stila