Turbo Mode - Qlima Diandra 50 S-line Gebrauchsanweisung

TURBO MODE

In Turbo mode, the stove operates at maximum power for 30 minutes. In Turbo
mode the temperature is pre-set to 30ºC. After 30 minutes, the stove returns to the
mode before the Turbo mode was activated. To select Turbo mode, hold down the
ECONO
TURBO
ON 1
mode, hold down the
ON 2
disappear from the remote control display and be replaced by the output level and
the set temperature. Press
ECONO MODE
In Econo mode, the temperature remains constant. Every 10 minutes the stove
adjusts the power until heat output level 1 is reached. To select Econo mode, hold
down the
play (2) and then push
(1) for at least 2 seconds. The word Econo will disappear from the remote control
display (2). Press
PROGRAMME 1 (ON1 AND OFF1)
5.
ACTIVATE AUTOMATIC MODE (ON1)
6.
Press button
and ON1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired activation time is shown in the remote control. Press
The display (5) on the stove will show Chrono. See figures 10 and 11.
DEACTIVATE AUTOMATIC MODE (OFF1)
Press button
and OFF1 symbol will flash on the remote control. Use the buttons
7.
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired deactivation time is shown in the remote control. Press
firm. The display on the stove will show Chrono. This text will disappear when the
set switch-on time and switch-off time have elapsed. See figure 12.
PROGRAMME 2 (ON2 AND OFF2)
As above but use buttons
4
158
SEND
button (1) for more than 2 seconds, and then push
ECONO SEND
AUTO OFF 1
button (1) for at least 2 seconds. The word Turbo (2) will
TURBO
CANCEL OFF 2
ON 1 AUTO
ON 2 CANCEL
ECONO SEND
TURBO
ON 1 AUTO
ON 2 CANCEL
button (1) for more than 2 seconds, until Econo appears in the dis-
ECONO SEND
TURBO (3). To deactivate this mode, hold down the
ECONO SEND
AUTO
ON 1 OFF 1
TURBO
ON 2 CANCEL OFF 2 AUTO
ON 1 OFF 1
(3) to confirm your choice. See figure 9.
ECONO SEND
ON 2 CANCEL OFF 2
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL
OFF 2
1. The desired switch-on and switch-off timer must be set when the
remote control is switched off.
2. The stove retains the temperature and heat output settings it had
before being switched off.
3. The minimum period of time between switching off and switching on
is 20 minutes. This is the time needed for the stove to complete the
cooling-down phase.
4. After a brief power interruption, the timer mode will have to be set
again.
ECONO SEND
TURBO
ON 1 (1) to switch on the stove according to programme 1. The time AUTO
OFF 1
CANCEL
ON 2 OFF 2
ECONO SEND
TURBO
ON 1 AUTO (1) to switch off the stove according to programme 1. The time
OFF 1
ON 2 CANCEL OFF 2
ECONO
TURBO
ON 1
ON 2
ECONO
TURBO
ON 1
OFF 1
ON 2
OFF 2
(3) to confirm your choice. See figure 8.
OFF 1
OFF 2
ECONO SEND SEND
TURBO
AUTO AUTO
ON 1 OFF 1 OFF 1
(1) and (2).
ON 2 CANCEL CANCEL OFF 2 OFF 2
(3). To deactivate this
SEND
AUTO
OFF 1
CANCEL OFF 2
button
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
ECONO SEND
and
TURBO
ECONO SEND
TURBO
AUTO
ON 1 ON 1 (1). OFF 1 AUTO
TURBO
ON 2 CANCEL
ON 2 CANCEL OFF 2
ON 1 AUTO (4) to confirm.
OFF 1
ECONO SEND
TURBO
ON 2 CANCEL OFF 2
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
ECONO SEND
and
TURBO
ECONO SEND
TURBO
ON 1 ON 1 AUTO AUTO (1).
OFF 1 OFF 1
TURBO
ON 2 CANCEL OFF 2
CANCEL
ON 2 OFF 2
AUTO (4) to con-
ON 1 OFF 1
ECONO SEND
ON 2 CANCEL TURBO OFF 2
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
OFF 1
OFF 2