Qlima Diandra 50 S-line Gebrauchsanweisung Seite 144

1. SAFETY INSTRUCTIONS
2. WHAT TO DO IN THE EVENT OF AN EMERGENCY OR FLUE FIRE
3. FIRST USE
3.1 Actions before and during initial start-up
4. NORMAL USE OF THE STOVE
4.1 Display information
4.2 Standard start-up procedure
4.3 Non-standard start-up procedure
4.4 Setting the temperature
4.5 Changing the heat output of the stove
4.6 Save mode
4.7 Standard shut-down
4.8 Remote control
4.9 Replacing the remote control batteries
5. FILLING THE PELLET HOPPER WITH PELLETS
5.1 Fuel type
5.2 Filling the pellet hopper
6. REGULATING THE VOLUME OF HOT AIR
7. MAINTENANCE
7.1 Maintenance to be performed by the end user
7.2 Cleaning the exterior of the stove
7.3 Cleaning the window
7.4 Cleaning the brazier and ash drawer
7.5 Cleaning the heat exchanger
7.6 Cleaning the hearth
7.7 Check the seal on the fire door
7.8 Cleaning the pellet hopper and auger
7.9 Cleaning the pellet supply pipe
7.10 Maintenance to be performed by an authorised technician
8. TECHNICAL SERVICE AND ORIGINAL PARTS
9. TROUBLESHOOTING
8.1 Resetting an error
8.2 Error list
10. TECHNICAL DATA
11. WARRANTY PROVISIONS
G
4
144
All figures referred to can be found in the back of this manual.