Dialling Phone Numbers Stored In The Phone Book; Displaying The Call Timer; Switching The Handset On /Off; Adjusting The Receiver Volume - AUDIOLINE 5400TECH Quintett Bedienungsanleitung

6.5

Dialling phone numbers stored in the phone book

Phone numbers stored in the phone book (refer to Storing phone numbers
in the phone book" Chapter 7.1) can be dialled quickly and easily.
1. Press the G button. The callers stored in the phone book are
displayed in alphabetical order.
Use the + and , buttons to scroll through and select an entry
stored in the phone book. To select an entry directly, press the
corresponding button to enter the first letter of the name
required. E.g. to access the name Peters", press 7" once.
2. Press the ‚ button and the number displayed is dialled.
6.6

Displaying the call timer

A few seconds after a conversation begins, the call timer appears in the
display replacing the phone number dialled.
6.7

Switching the handset on /off

Press the R button for three seconds to switch the handset on and off.
Note: No calls can be received when the handset is switched off.
6.8

Adjusting the receiver volume

Press the + or , button during a call to adjust the receiver volume.
There are five levels available for selection.
6.9

Redialling button

The last ten phone numbers dialled are stored for immediate redialling.
1. Press the F button. The last phone number dialled appears in
the display.
2. Press the + or , button to select a phone number from the
redialling list.
3. Press the ‚ button and the number displayed is dialled.
Note: If the phone number in the redialling list is stored in the phone
book, the corresponding name appears in the display.
− Operation −
59