Hendi Hokker 147276 Bedienungsanleitung Seite 8

• The tubing or the flexible hose must be changed within the prescribed intervals or with-in
one year. The flexible hose should not extend than 1.5m according to standard EN 16436-
1:2014+A3:2020.
•
H
D
Intended use
• The device is intended for professional use and
can be operated only by qualified personnel.
• The appliance is designed only for cooking a vari-
ety of food via heating the suitable cookware. Any
other use may lead to damage to the appliance or
personal injury.
EN
Connecting the gas bottle
1 = Main tap
2 = Pressure regulator
3 = Gas hose
4 = Gas Bottle
5 = Rubber washer
8
The maximum cylinder dimensions(regulator included) should not
exceed (D)50x(H)75cm if no cylinder compartment included.
• Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the device.
Attach the pressure regulator to the gas bottle
using the large brass nut. Always ensure that the
rubber-sealing washer is present in the nut. (NB.
This rubber washer is not required for UK-type
pressure regulators). Tighten the nut and gas hose
well. Note that the nut has a left-hand thread.
Check the connections for leaks using a soap and
water solution.
Every time a newly filled gas bottle is connected, a
new rubber washer must be fitted. In most cases,
your gas supplier will include it with the bottle.