Inserting Or Removing The Console - Derby cycle BionX 2011 Anleitung

Brake switch
4
• A sensor integrated with the
brake lever – connected to the
BionX console
• Upon activation assistance
is shut off ("kill switch")
generate mode is activated

Inserting or Removing the Console

Power Supply
• Power supply to recharge
the LiMn-battery
• Input voltage: 100-240V
• Output voltage: 26V
• Max. charge current: 3.45A
• Output: 90W
Inserting the console
• Slide the console into the console mount on the
handlebar
• Make sure that the console engages securely. When
inserted correctly, you will hear an audible "click".
Removing the console
• Release the console by pushing the release lever
on the console mount
• Slide the console out of the console mount
5