XIONEER Vortex EZ Bedienungsanleitung Seite 8

•
Wear a protective gown when dyeing your parts to
avoid dyeing of your clothing by spilling or
splashing of the dyeing solution.
•
TCN GTC universal liquid dye and Nakoma
Products Rit ProLine may be irritant. Therefore,
always wear protective clothing consisting at least
of safety goggles and protective gloves when
using the Vortex EZ. Use the basket when loading
and unloading models.
• If your skin comes into contact with the dyeing
solution or dye, wash it off thoroughly with plenty
of water and soap. If you get dyeing solution or dye
in your eyes, wash it thoroughly with water for
several minutes and remove any contact lenses
beforehand. If eye or skin irritation persists, please
call emergency.
• If you have inhaled the dye, move to a well-
ventilated
breathing. In case of persistent indisposition,
please call emergency.
•
If dyeing solution or dye is swallowed, drink plenty
of water in small sips and seek medical attention.
Do not induce vomiting.
• Remove and wash clothing that has been in
contact with dyeing solution or dye.
•
There is a risk of scalding in case of contact with
the hot dyeing solution or hot surfaces. In case of
scalding, ensure sufficient cooling of the affected
areas. There is also a risk of scalding when opening
the container due to escaping hot water vapor.
•
Do not open the drain valve without the hose
connected.
Page 8
place and ensure unobstructed