Scope Of Delivery; Set Up; Commissioning And Filling - XIONEER Vortex EZ Bedienungsanleitung

Scope of delivery

The following components are included in the package:
•
1x Vortex EZ dyeing station
•
1x Basket
•
1x filling and drain hose incl. hose clamp

Set up

Set up the Vortex EZ on a stable, straight, dry, heat-
resistant, and moisture-resistant surface. When setting
up, consider the weight of the tank including the dyeing
solution of approx. 60 kg. Furthermore, the Vortex EZ
may only be used in a dry and well-ventilated indoor
environment. Ideally, place the container near a sink or
near a water connection. This facilitates filling and
subsequent emptying of the solvent.

Commissioning and filling

Fill the container with tap water up to the "MAX" indicator.
To do this, you can use the hose from the accessories and
mount it on a faucet with a suitable attachment.
Remove any water splashes on the outside of the unit
with a soft cloth.
Add the dye and the dyeing additives (such as acid or
detergent). Keep the recommended dosages in mind.
Plugin the power cord of the Vortex EZ and switch it on.
The power cord must not be under tension.
Page 10