Controls; Material And Temperature Recommendations - XIONEER Vortex EZ Bedienungsanleitung

Controls

The following picture shows the controls of the Vortex EZ.
1
Description:
1. Propeller speed control. You can use it to reduce
the rotation speed of the propeller to prevent the
liquid from foaming. Turn the knob all the way to
the left to turn the propeller off completely.
2. Heater indicator lamp. (ON when heating, OFF
when not heating.)
3. Large rotary control for setting the temperature
(up to 85 °C).
4. Main switch for switching the device on and off.
Material
recommendations
Regularly check the temperature and the fill level of the
dyeing solution to prevent damage to your 3D parts. Ask
the manufacturer of the model material about the
maximum dyeing temperatures. As a general guideline,
you can set 20 - 30 °C less than the glass transition
temperature (Tg) of your model material. If you know the
Page 12
3
2
and temperature
4