Operation; Menu Structure - EuroLite LED CBB-2 Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and
sound
Microphone sensitivity
for sound control
White color setting
Color temperature
Dimmer
Fading
Strobe
Sound control silent
scene
DMX lost
Slave mode
IR remote control
Potentiometer
Device information
Display
Addr
Stat 01-27
Auto Au1 – 3
Soun So1 – 3
SPEE SP 1-9
SEnS SE 1-9
U000-255
Colo
C000-255
2400K
2700K
tEMp 3200K
4300K
5000K
diMM dI 1-dI 9
FAdE FA 0-9
FLAS FL 0-9
SILE
LoSt
SLAV Slave
InFr
PotE
V1.0
25/32
d001-512
6CH
d001-512
4CH
d001-512
3CH
d001-512
2CH
Constant lighting in one of 27 colors
Auto program 1-3
Sound program 1-3
Program running speed
slow > fast
Microphone sensitivity
low > high
Warm white 0-100%
Cold white 0-100%
2400K
2700K
3200K
4300K
5000K
Total brightness
dark > bright
Fading program
Strobe program
on LEDs off if there is no music signal
oFF LEDs remain on if there is no music signal
blaC LEDs go off
Hold Spot holds the last received signal
FuLL All LEDs 100% on
Goes to pre-selected static color "01-
Stat
27"
Goes to pre-selected auto program
Auto
01-03
Slave mode
on IR remote control on
oFF IR remote control off
on Potentiometer on
oFF Potentiometer off
V1.0 Display of the software version
Function
00131545, Version 1.0