Operation; Setting The Operating Mode; Menu Overview - Renkforce 1488543 Bedienungsanleitung

10. Operation

a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After connection to the mains, the effect light will perform a reset. Only after this process is completed will
the device be ready.
• Use the display and MENU and ENTER buttons as well as the UP and DOWN buttons to set the operating mode.
• Press the MENU button to select the individual menu items.
• Push the ENTER button.
• Change the values to be set or options with the UP or DOWN buttons.
• Confirm the selection with the ENTER button.
• To go back one level in the menu without changes, push the MENU button once.

Menu overview

For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item Option
addr 1-512
ChNd 10Ch
12Ch
15Ch
SLNd NASt
SL 1
SL 2
ShNd Sh 1 - Sh 4
Auto oFF
on
SoUn oFF
on
SenS 0-100
bLNd no
YeS
Led oFF
on
Function
Setting the DMX starting address
10-channel DMX operation
12-channel DMX operation
15-channel DMX operation
Device is in master mode
Device is in slave mode 1 (normal)
Device is in slave mode 2 (inverted)
4 different demo shows
Automatic mode deactivated
Automatic mode activated
Sound-to-light mode deactivated
Sound-to-light mode activated
Setting of the music sensitivity for sound-to-light operation
Pause function deactivated
Pause function activated
Display switches off after approx. 1 minute
Display permanently on
29