Renkforce 1488543 Bedienungsanleitung Seite 25

• Also observe the safety notes and operating instructions of the other devices to which the product is
connected.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Have maintenance, adjustment and repair work only performed by a specialist or specialist workshop.
• In case you have questions which are not answered in this manual, please contact our technical service
or other specialists.
• Attention, LED light:
- Never look into the LED beam!
- Never watch directly or with optical instruments!
• Never look straight into the light source during operation. The bright light flashes may temporarily impair
your eyesight. Apart from this, epileptic fits may be triggered under certain circumstances in persons
sensitive to such lights. This particularly applies to epileptics.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye. Therefore,
familiarise yourself with the statutory regulations and measures of precaution for the operation of this kind
of LED device before using the device.
• The mains socket must be close to the device and easily accessible.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket on all poles
(e.g. via the respective circuit breaker and FI switch) and then carefully pull the mains plug from the
mains socket. Never use the product if the mains cable is damaged.
• Anyone operating, installing, setting up, commissioning or servicing this effect light must be trained and
qualified properly and observe these operating instructions.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device or in its
vicinity. Liquids may get into the housing and impair electrical safety. This also poses great danger of fire
or potentially fatal electric shock! If this is the case, first power down the respective mains socket on all
poles (e.g. switch off circuit breaker and FI switch) and then pull the mains cable from the socket. Do not
operate the product anymore afterwards, but take it to a specialist workshop.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Never operate the device unattended.
• Only operate the device in moderate climates, never in tropical climates.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insurance As-
sociation for Electrical Systems and Operating Materials are to be observed.
25