Axkid SPINKID Bedienungsanleitung Seite 10

Thank you for choosing Axkid SPINKID
Read this instruction manual before installing the child seat in your vehicle.
For more information and installation videos visit www.axkid.com.
Axkid SPINKID is a rear-facing car seat approved for children with
a height between 40-105 cm, ≤18 kg
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use in, i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle user' s manual. If in doubt, consult either the Enhanced Child Restraint
System manufacturer (www.axkid.com) or the retailer.
Important information
To maximize your child' s safety, it is important that you keep the following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously affect the safety for your child. If in doubt, contact
your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use the child seat in a seating position where an active frontal airbag is fitted. If you still wish to install the child seat in this location
the airbag must be switched off according to the vehicle manufacturers instructions.
• Should you have an accident, no matter how small, your car seat should always be replaced. It may have damage that is not visible and
could seriously affect the safety of your child. For this reason, Axkid does not recommend purchasing secondhand car seats.
• If the child seat has been exposed to direct sunlight, make sure the child seat is not too hot before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event of an ac-
cident.
• Ensure that the child seat is installed in a way where no parts become trapped by movable seats, car doors, etc.
• Do not attempt to disassemble or modify any part of the child seat. The warranty and the safety performance of the Axkid car seat could
be affected if doing so.
• Never use the child seat without the textile cover. The seat textile cover is a safety feature and may only be replaced with an Axkid origi-
nal seat textile cover.
• Read the vehicle handbook and the vehicle list at www.axkid.com to find which seating positions are suitable for this car seat.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If you have any doubts, contact the retailer where the car seat was purchased or contact info@axkid.com.
• The child seat may only be installed rear-facing.
• Always make sure that the harness is adjusted to correctly fit your child' s body. The harness is adjusted by moving the head support.
• Make sure that the child' s back is pushed against the car seat when restraining your child with the harness.
• Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked, you should not be able
to pinch the straps.
• Make sure there is no twist in the harness.
• Always make sure the support leg is in its correct position and that is has contact with the vehicle floor. The support leg is a very impor-
tant safety feature designed to maximise your child' s safety in an accident.
10 10