Herunterladen Inhalt Inhalt Diese Seite drucken

Hendi 239391 Gebrauchsanweisung Seite 8

Vorschau ausblenden Andere Handbücher für 239391:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
Problems
The appliance does not switch ON.
Cooling fan is operating even after
the appliance is switched to Standby
mode.
Technical specification
Item no.
Operating voltage and frequency
EN
Rated input power
Power setting
Temperature setting
Timer setting
Protection class
Dimension
Remark: Technical specification is subjected to change without prior notification
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
8
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the heating surface
during storage as it may crack it.
• Error codes shown on the digital display (3). (See
--> Error codes display)
Possible cause
- Power plug is not connected proper-
ly with the electrical outlet.
- On/Standby (1) button is not pressed.
- This is normal. The cooling fan con-
tinues running in Standby mode for
some time to cool down all internal
elements.
239278
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Possible solution
- Check the power plug to make sure
it is connected properly.
- Press the On/Standby (1) button to
start operation.
- Wait until the cooling fan stops ro-
tating.
239391
220-240V~ 50 / 60 Hz
2000W
100W ~ 2000W
35°C ~ 240°C
0 min ~ 180 min
Class I
293 x 373 x (H) 56 mm

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

239278

Inhaltsverzeichnis