12.2
Checklist before each use
General visual check: Check all connecting parts for tightness, tighten if necessary.
•
Check battery status on control panel.
•
Check function of coupling lever.
•
Check that the dumper box is in the fully lowered position.
•
•
Check brake function.
12.2.1
Check battery status
12.3
Operation
12.3.1
Switch the machine on and off
12.3.2
Driving on level ground
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
•
Set battery switch to ON (1).
Set key switch to ON (2).
•
•
Read battery status (3).
Charge battery if necessary, see chapter Mainte-
•
nance.
Set key switch to OFF (2).
•
•
Set battery switch to OFF (1)
Switch on
Set battery switch to ON (1)
•
Make sure that the coupling lever (2) is not operated
•
(2).
Set the key switch to ON position (3).
•
Switch off
Set the key switch to OFF position (3).
•
Set the battery switch to OFF (1).
•
Move machine
•
Switch on the machine; see previous chapter
Engage forward or reverse gear (4).
•
o
F = forward
o
R = reverse
Select the speed level (5).
•
I = low
o
o
0 = middle
o
II = high
•
Press the coupling lever (2).
Slowly press the throttle lever (6).
•
•
The machine moves in the selected direction.
Stop machine
Slowly release the throttle lever (6) and the coupling
•
lever (2). The machine stops.
Switch off the machine; see previous chapter.
•
OPERATION
23
ZI-ED500