Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Keep batteries away from metallic objects such as paper clips, coins, keys, screws or other me-
•
tallic objects. This can cause bridging of the poles. A short circuit between the poles can result
in burns or fire.
•
Handle discharged batteries with care. Batteries are never completely discharged. In the event
of a short circuit, the residual energy contained can lead to considerable heat development and
cause fire.
10.5
Hazard warnings
10.5.1
Residual risks
Despite intended use, certain residual risks remain.
•
Risk of crushing due moving machine parts.
•
Risk of injury from stones or similar objects thrown around by the machine.
10.5.2
Hazardous situations
Due to the design and construction of the machine, hazardous situations may occur which are identified
as follows in these operating instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical suitabil-
ity/training are and remain the most important safety factor in the error-free operation of the machine. Safe
working depends first and foremost on you!
11
ASSEMBLY
11.1
Check scope of delivery
Check the machine immediately after receipt of the delivery/unpacking for transport damage or missing
or damaged parts.
Immediately bill any visible transport damage on the delivery bill and immediately report any damage to
the machine or missing parts to your dealer or the shipping company.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
D AN G E R
WAR N I N G
C AU TI O N
N O TE
ASSEMBLY
21
ZI-ED500
Werbung
Inhaltsverzeichnis
Fehlerbehebung
