Video-Inputs „V-In1" And „V-In2 - Renkforce 449238 Bedienungsanleitung

e) Video-Inputs „V-IN1" and „V-IN2"
When the two video inputs are selected and you push the button „MENU", the associated OSD menu is displayed.
The OSD menu is operated as follows:
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to select
between the submenu „PICTURE", „OSD", „FUNCTION" and „AUDIO".
• The button „q" or „p" on the IR-remote control (or „SOURCE" on the monitor) can be used to select the functions.
• The buttons „t" or „u" on the IR-remote control (or „UP/+" and „DOWN/-" on the monitor) are used to select the
respective set values.
• If you have completed the settings, the button „MENU" will take you back to the selection of the submenu „PIC-
TURE", „OSD", „FUNCTION" and „AUDIO" .
Leave the OSD menu by pushing the button „MENU" again. Alternatively, wait without pushing a button until the
display of the OSD menu disappears on its own.
Submenu „PICTURE"
The following functions are available:
„CONTRAST"
„BRIGHTNESS"
„HUE"
„SATURATION"
„SHARPNESS"
„COLOR TEMP"
„PICTURE MODE"
38
Contrast
Brightness
Colour value (only for NTSC, otherwise „HUE" is displayed grey and cannot be selected)
Colour saturation
Image sharpness
Colour temperature
Image mode