Operation Of The Device; Setting Up The Device; Fitting The Cuff - uebe Visocor HM40 Gebrauchsanleitung

Operation of the device

1. Setting up the device

Place the enclosed batteries in the device
if they have not already been inserted (see
page 48, Changing batteries).

2. Fitting the cuff

Bare your left wrist, remove any watch or
jewellery. Place the device round the wrist.
The distance between the top edge of the
cuff and the palm should be approx. 1 cm.
Left-handed persons can place the cuff
round their right arm. The instructions for
use apply by analogy. Now pull the free end
of the cuff tight and place it over the velcro
strip firmly. Owing to its optimised shape
the cuff sits tightly in order to prevent any
measuring errors.
Important:
Never use the device above a critical part of
the body (e.g. wound, intravascular port).
A C
GB-39