Gude expert net control 2190 GSM Benutzerhandbuch Seite 20

Expert Net Control 2110 und 2190
[response text]
Account credit: [x]
[response text]
Device name: [name]
Power switch: [powerport] [s] -> [s]
[powerport] = Port 1 .. Port 99 (oder je nach Config:portname)
[s] = on .. off
Powerport state: [powerport] is [s], [...], [powerport] is [s]
[powerport] = Port 1 .. Port 99 (oder je nach Config:portname)
[s] = on .. off
Input state: [input] is [s], [...], [input] is [s]
[input] = Input 1 .. Input 99 (oder je nach Config: inputname)
[s] = on .. off
Switch sequence: [s]
[s]
[powerport] [c] -> wait t -> [c]
[powerport] = 'Port 1' .. 'Port 99' (oder je nach Config:Label)
[c] = on, off, toggle, coldstart
Account credit: [x]
Config: name = value, [...], name = value
oder
command parse error
2.3.1.2.2 Status Change Report SMS
Eine Status Change Report SMS folgt dem Format:
Device name: [name]
[response text]
Account credit: [x]
[response text]
Device name: [name]
[powerport] -> [s]
[powerport] = 'Port 1' .. 'Port 99' (oder je nach Config:portname)
[s] = 'on' .. 'off'
[powerport] [s]
[powerport] = 'Port 1' .. 'Port 99' (oder je nach Config:portname)
[s] = batchmode, toggled, Coldstart
Temperature state: [val]
[val] = 'over the MAX limit', 'under the MIN limit'
Account credit: [x]
Kommando spezifische Antwort, ggf. mehrzeilig
Festes Prefix
Kommando spezifische Antwort, ggf. mehrzeilig
20
Bedienung