eta PURETEE Bedienungsanleitung Seite 23

GB
UV LAMP A7 REPLACEMENT
The UV lamp is designed for about 15,000 operating hours, this equals to about 20 months
of continuous 24/7 operation. Based on the frequency of use, for most users it means they
will never need to replace the lamp. However, if you reach the end of its lifecycle, or if you
want to dispose of the appliance, please detach it by unscrewing 2 screws on sides which
hold the plastic cover A8, where the UV lamp is placed. There are several jumper cables in
the UV lamp cover and also in the purifier main unit, which are connected with plastic joints
in the middle – it is necessary to detach the cover with the cable here and attach
a new lamp. When placing the cover with the lamp back inside the purifier, proceed carefully
in order not to squash the cable – place the cable carefully in the hole in the cover/purifier
and then screw the cover tightly. If you do not want to replace it yourself for whatever
reason, ask a qualified person to do it for you.
IV. MAINTENANCE
Maintenance of the purifier includes cleaning the power unit body and replacement of filter.
Power unit – Only clean the power unit body with slightly damped cloth with non-aggressive
cleaning agent added. Do not allow water to get inside! Let the purifier thoroughly dry out
before using it again.
HEPA filter A5 – To guarantee proper function and air purification quality, HEPA filter must
be replaced in regular intervals. Never wash the filter to avoid reducing the filtration capacity
of the filter; only knock it out, vacuum or blow it with compressed air – however this will not
fully restore the filtration capacity of the filter. The recommended replacement interval is
after 6 months of regular use. New filter order code: ETA056900070
UV lamp A7
UV lamp is designed for about 20 month of non-stop operation. After this period, the lamp
will start losing its disinfection qualities, and we recommend replacing it for effective air
purification. The lamp replacement interval depends on the frequency of your use of UV
disinfection. New UV lamp order code: ETA056900060
V. ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and accessories, as
well as their recycling, are on all the pieces if their dimensions enable it. The symbols on
the product or in the accompanying documentation mean that the used electric or electronic
products must not be disposed together with municipal wastes. Please, hand them over to
the collection points designed for their correct disposal, where they will be accepted free
of charge. By correct disposal of this product you can help to preserve valuable natural
resources and help to prevent possible negative impacts to the environment and to human
health, which could be the results of incorrect waste disposal. For further details ask the
municipal authorities or the nearest collecting point. Penalties can be charged for incorrect
disposal of such wastes, according to national regulations. If the appliance is to be put out
of operation definitely, we recommend cutting off the feeder cable, to disable its use.
UV Lamp Disposal
If the UV lamp breaks, turn off the air purifier. DO NOT operate it with a broken lamp.
DO NOT use a vacuum to clean up breakage. Sweep debris into a plastic bag and dispose
properly.
23 / 47