Possible Faults; Technical Data; Guarantee - ATIKA LSH 2500 Originalbetriebsanleitung

Before each fault elimination:
Switch off device.
−
Wait for standstill of the device.
−
Pull out mains plug.
−
Problem Possible cause
Motor won't start
⇒ No mains power (power failure)
⇒ Connection lead defect
⇒ Motor or switch defect
Material is not sucked
⇒ Machine is clogged or blocked
in properly (reduced
⇒ Bag too full
vacuuming power)
⇒ Speed setting too low (only for garden vacs with
⇒ Extension cable too long, or cross-section too

In case of further faults or inquiries please contact your local dealer.
Model
Year of construction
Motor power P
1
Motor
Speed n (with speed control)
Blowing air flow (max. air velocity)
Suction power
(max. air flow)
Hand arm vibration (as per EN 1033/DIN 45675)
Measuring uncertainty
Bag (volume)
Protection class
Weight
Sound power level L (as per 2000/14/EC)
WA
Measuring uncertainty
Sound pressure level L (as per 2000/14/EC)
PA
Measuring uncertainty
Please observe the enclosed terms of guarantee.
18

Possible faults

fully variable speed control)
small. Socket too far away from main connec-
tion, and cross-section of connection lead too
small.

Technical data

Remedy
⇒ Check fuse (10 A)
⇒ Replace lead or have lead checked (electrician)
⇒ To solve the problem, contact the manufacturer
or an authorised company (see customer service
list)
⇒ Eliminate the blocking, call the service if required
⇒ Empty bag
⇒ Adjust to higher speed
⇒ Extension cable at least 1.5 mm
m long. Cross- section of at least 2.5 mm
longer cables.
LSH 2500
2500 W
AC-motor 230 V ~ 50 Hz
6000
a
–
II double insulated
measured
sound power level 98.3 dB (A)
guaranteed
sound power level 102 dB (A)
K

Guarantee

Never use defect lead
LSH 2600
see last page
2600 W
–
14000 min
-1
270 km/h
720 m³/h
= < 3.96 m/s²
vhw
K = 1.5 m/s²
45 l
approx. 3.6 kg
K = 3.0 dB (A)
87 dB (A)
= 3.0 dB (A)
PA
Technical modifications reserved!
, maximum 25
2
in
2