Specification; Dimensions And Connections - STIEBEL ELTRON MEKD Bedienung Und Installation

INSTALLATION

Specification

To save water, you can restrict the flow rate:
f Unscrew the hose from the tap.
f Remove the silicone seal ring from the union nut on the hose.
f Position the flow limiter in the union nut on the hose, in
place of the silicone seal ring.
f Screw the hose onto the tap until finger-tight.
Property damage
!
If the flow limiter is inserted between hose and hand
shower attachment, the hose may leak due to the pres-
sure being too high.
f Only insert the flow limiter between hose and tap.
22 | MEKD | MEBD
8. Specification
8.1

Dimensions and connections

MEKD
49
198
260
100
G1/2
193
www.stiebel-eltron.com