Operating The Multi Saw With Extension Pole (Optional); Changing The Saw Chain; Kick-Back - Westfalia X-SAW WXS 18-110 Originalanleitung

Operating the Multi Saw with Extension Pole (optional)

Hint: (The extension pole is not included in delivery)
1. Slide the multi saw into the extension pole.
2. Hook the bracket into the saw and fold the lever
down to secure the multi saw and the extension
pole together.
3. To remove the multi saw, lift up the bracket and pull
out the saw from the extension pole.
4. Attach both components of
the extension pole togeth-
er and tighten the screw
cap by turning it counter
clockwise onto the thread.
Only hand-tight the screw
cap.
5. Insert the battery into the
extension pole.
6. To switch on the saw, first depress the safety
switch (A) and then press the trigger (B) on the handle. To switch off
the multi saw, release the trigger.
Operation
52
A
B