Transport And Storing - Westfalia 82 44 29 Bedienungsanleitung

 Attention: Prior to add missing pressure into the pressure tank, empty the
water bag using the water drain screw (6) (see next chapter).

Transport and Storing

 Before storing the booster pump, clean all parts
thoroughly and empty the water from the housing.
Unscrew the water drain screw (6). Also unscrew the filter
insert (9).
 Wait until the water bag is completely empty and re-
tighten the water drain screw (6) and the filter insert (9)
on the housing.
 Store the booster pump in a dry place that is protected
from dust and frost. It is essential that the booster pump
is stored empty and dry.
 Carry the booster pump by the carrying handle (1) only. Never carry, lift up or
hang the pump by the power cord.
Storing and Transport
22