Filling The Appliance With Water - Silvercrest IAN 290939 Bedienungsanleitung

4) Open the filter basket holder
basket
5) Take a paper coffee filter (size 1 x 4) and fold its sides over. Insert the paper
filter into the filter basket
6) Replace the filter basket lid
filter basket holder

Filling the appliance with water

WARNING
Health hazard!
► Use only drinking water for your coffee!
1) Open the lid of the water tank
so, use the coffee pot
section "Before first use" and fill it directly. Select a quantity of water corre-
sponding to the required amount of filter coffee. Use the fill level indicator
on the water tank
2) Place the coffee pot
CAUTION
Property damage!
► Never fill the water tank
10 cups (MAX marking). When carrying out a run through with water only,
e.g. before first use or for cleaning, do not exceed the marking for 8 cups
on the fill level indicator
► Never fill the water tank
indicator
NOTE
► During the brewing process, the amount of water decreases: some evapo-
rates and the coffee grounds also retain some water. This is why the volume
of coffee in the coffee pot
water you filled into the water tank
SKML 1000 A1
.
.
back on the filter basket
.
or remove the water tank
for reference. Close the lid of the water tank
back in the appliance.
to more than the total amount required for
!
with less than 2 cups of water. Use the fill level
on the water tank
is always slightly less than the amount of
and take the filter basket lid
and fill the water tank
as described in the
for reference.
.
off the filter
and close the
with water. To do
again.
GB │ CY │ 9 ■