Set-Up And Connection; Before First Use - Silvercrest IAN 290939 Bedienungsanleitung

Set-up and connection

DANGER
Electric shock!
► Do not set up the appliance near water contained in a sink or other
containers. Always place the appliance on a dry surface. Proximity
to water is hazardous, even if the appliance is switched off. Always
disconnect the plug from the mains power socket after use.
CAUTION
Property damage!
► Never place the appliance near sources of heat.
► Always place the appliance on a level, heat-resistant surface in order to
prevent damage to the appliance and surface.
1) Place the appliance on a level and heat-resistant surface.
2) Place the coffee pot
3) Insert the plug into the mains power socket. You will hear a beep, the
,
button
Before first use
CAUTION – PROPERTY DAMAGE!
► Never fill the water tank
10 cups (MAX marking). When carrying out a run through with water only,
e.g. before first use or for cleaning, do not exceed the marking for 8 cups
on the fill level indicator
► Never fill the water tank
indicator
1) Rinse out the coffee pot
2) Open the filter basket holder
appliance forwards. Remove the filter basket lid
from the appliance.
3) Rinse the filter basket
both in the appliance again and close the filter basket holder
it backwards until it clicks into place.
4) Remove the water tank
the water tank
water.
SKML 1000 A1
in the appliance.
buttons and the light element
lights up continuously blue.
to more than the total amount required for
!
with less than 2 cups of water. Use the fill level
on the water tank
carefully with water and place it in the appliance.
and the filter basket lid
. The best way to do this is to first open the lid on
and pull the water tank
light up blue briefly, the
for reference.
by pulling the handle on the right side of the
and the filter basket
in clean water. Replace
upwards. Rinse it out with clear
by pushing
GB │ CY │ 7 ■